Coreluxe is a premium recycled fiber underlayment built for luxury vinyl plank, luxury vinyl tile and multi-layer flooring like WPC, SPC, and rigid core vinyl planks. It’s also a great solution for laminate, engineered hardwoods, and floating ceramic tile systems. Suited for floating, glue down, and mechanically fastened installations either in residential and commercial applications. Impressive sound ratings (providing exceptional through-the-floor and footfall noise protection) including an industry leading Delta IIC rating makes Coreluxe the ideal underlayment to be installed under LVT, LVF and MLF flooring; with STC rating of 62, IIC rating of 70 and Delta IIC of 28.
Flooring underlayment adds many benefits to your floor, even with pad-attached flooring. Pad-attached flooring offers a great start of protection and insulation but with Coreluxe underlayment, get the full protection your floor deserves.
View All BenefitsWater Protection
Sound Reduction
Compression Resistant
Insulating Value
Environmentally Friendly
Anti-Microbial Treated Fibers
Perfect For Pad-Attached
Concrete subfloors continuously transmit water vapor which can turn into harmful bulk moisture if trapped. When installed properly, Coreluxe becomes a powerful moisture management system that allows concrete subfloors to ‘breathe’ without affecting your floor.
This is due to its patented, recycled, fibers which absorb and spread vapor emissions throughout the pad to areas where it can escape, while the attached vapor barrier protects the flooring above from moisture traveling throughout the pad below. All of Coreluxe’s fibers are treated with an anti-microbial as well to inhibit mold and mildew, keeping your floors safe and dry.
BenefitsCoreluxe’s pad is constructed from randomly air-laid filaments to create a capillary affect to cushion the floor, absorb sound, and help make floors sound more like real wood.
This method is designed to measure the impact sound transmission performance of a floor-ceiling assembly in a controlled laboratory
environment.
This method measures the sound-insulating property of a partition element is
expressed in terms of the sound transmission loss.
An impact sound test that directly evaluates acoustic performance properties of underlayments based on the difference of acoustical performance with the entire flooring assembled on top of the subfloor and of the sub-floor only.
Data Type | Value |
---|---|
Material Composition | Blended synthetic fibers and polyethylene film. Inert hot-melt adhesive |
Weight | 9 lbs/100sq ft roll : 32.4 lbs/360sqft roll |
Thickness | 1.4mm |
Density | 18.28 lbs/ft3 |
Compression Resistance @ 25% (ASTM D1667) | 2.97psi |
Compression Resistance @ 30% (ASTM D1667) | 6.11 psi |
Compression Resistance @ 50% (ASTM D1667) | 64.58 psi |
Compression Set @ 25% (ASTM D1668) | 8.8% |
Moisture Limits (CaCl) | 6lbs |
Intended Usage | Residential applications, light commercial applications |
Water Vapor Transmission Rate | 1.31 lbs / 1000 sq ft / 24 hours |
Meets or exceeds Federal Flammability Standard: 1-70 (Pill Test) and ASTM E84 Steiner Tunnel Test.
Tested for 81 different off-gas compounds in accordance with CA 01350. Passed to the level of Collaborative for High Performance Schools (CHPS) and Office Spaces
Passed the most rigorous emissions test: Section 01350 for CHPS and Standard Office Sound Properties. GREENGUARD GOLD certified for low emissions.
View our installation and certificates by clicking on images below.